إضغط لتفاصيل الإعلانات



Results 1 to 2 of 2
Share
  1. #1
    Join Date
    Nov 2007
    Location
    Arab world!
    Posts
    6,169
    Blog Entries
    4
    Rep Power
    10

    Arrow Use transport rules to create disclaimers in an Exchange Server 2007 Organizations

    Overview

    The new architecture of Exchange Server 2007 allows administrators to use many features to manage the messages in transit using transport rules. In this article we will discuss a scenario in which we deploy some transport rules to use disclaimers based on a company’s needs.
    The objective of this article is to explain how we achieved a disclaimer solution using Exchange Server 2007 and the transport rule feature.
    Scenario

    Our example environment will consist of a company with 1,000 mailboxes and our solution must meet the following requirements:

    • All of the internal messages sent through the Internet must have a company disclaimer within the footer of each message. Messages between internal users do not need to have a disclaimer.
    • Internal messages must have information about the company security policy advising the users about security in the header.
    • The support team will need to have an additional disclaimer, which contains all the support numbers.

    Based on these requirements, we are going to create three transport rules to meet them.
    Where do we need to create the transport rules? On the Edge or the Hub transport roles?
    The transport rule feature exists in both roles: Edge and Hub Transport. Some actions are found in both roles, but the disclaimer and message classifications actions are only found in the Hub Transport role. So, we are going to work on this role to implement a Disclaimer.
    Creating a disclaimer for the Exchange organization


    1. Open the Exchange Management Console
    2. Expand Organization Configuration
    3. Click on Hub Transport
    4. In the Toolbox Action click on New Transport Rule
    5. Introduction. We must type the rule name and an optional description. We can also enable or disable the rule. Click Next to continue. (Figure 1)


    Figure 1: Initial screen to create a transport rule

    1. Conditions. In this window, we will begin defining the conditions for our transport rule. For the purposes of this example, we will select the “from users inside or outside the organization” checkbox and in the box below (Step 2) we will get the value associated with that condition. We will leave the Insideoption. (Figure 2)


    Figure 2: Defining the first rule condition

    1. Conditions. We must also select the “sent to users inside or outside the organization”checkbox. Then, we can click on the Inside option of the second condition to change the Insidevalueto Outside. (Figure 3)


    Figure 3: Adding a second parameter in the conditions of the transport rule

    1. Select Scope. On the Select scope window, we can change the scope for the second parameter. We are going to select Outside and then we will click OK to continue. (Figure 4)


    Figure 4: Changing the value for Outside

    1. Conditions. Now we can review the condition that we set for our new transport rule. This new transport rule will be applied to all messages from “Inside the organization” to “Outside the organization”. (Figure 5)


    Figure 5: Verifying the conditions of our new transport rule

    1. Actions. In this window, we have to click on the “append disclaimer using font, size, color with separator and fallback to action wrap if unable to apply” checkbox. In step 2, we can see many links for each setting that we can use for our disclaimer. Click on the Disclaimer text link.

    By default, the disclaimer is already complete with standard values, but we can change them according to our preferences. We will review the available options:
    Location: We can define the position where the disclaimer will be added inside the message. The possible values are append and prepend;
    FontSize: Single value with the choices of Smallest, Smaller, Normal, Larger, or Largest
    FontColor: Single value with the choices of Black, Blue, Fuchsia, Gray, Green, Lime, Maroon, Navy, Olive, Purple, Red, Silver, Teal, White, or Yellow
    Separator: If we plan to use separators, we can configure them here. The possible values are with separator and without separator
    FallBackAction: Single value with the choices of Wrap, Ignore, or Reject
    Wrap: If the disclaimer cannot be added in the original message, a new one will be created and the original message will be attached to the message
    Ignore: If the disclaimer cannot be added in the original message, the message will not be modified, and the disclaimer will not be added.
    Reject: If the disclaimer cannot be added in the original message, Exchange Server will not deliver that message. The sender will get an NDR message explaining the reason why that message cannot be delivered.

    Figure 6: Defining the actions to take in the disclaimer transport rule

    1. Specify the disclaimer text. We have to complete this dialog box with the text that will be used in our disclaimer. (Figure 7)


    Figure 7: Adding the text message for all of the messages that will be sent through the Internet

    1. Actions. This will be the final screen of our Action section in the Transport Rule. We can review (and if needed, redefine) some settings. Then click Next to continue. (Figure 8)


    Figure 8: Changing some settings in the disclaimer of this new transport rule


    1. Exceptions. We can define exceptions based on conditions. These exceptions are useful if some people do not need to send or receive message with disclaimers. Select the desired option and click Next to continue. (Figure 9)


    Figure 9: Seeing Exceptions that we can add to the rule

    1. Create Rule. This is the summary window, with all the defined settings for our new disclaimer. Review the options and click New. (Figure 10)


    Figure 10: Configuration summary of the new transport rule

    1. Completion. The new rule was created with the New-Transportrule command-let with all the associated parameters already defined.


    Figure 11: Completion window for our disclaimer

    1. We can see that a new rule was created in the Exchange Management Console (Figure 12)


    Figure 12: Our first transport rule
    After rule creation, we can check if the rule is working as expected, with a couple of tests:
    Test #1: Send a message between two internal users (inside the organization)
    Expected result: the disclaimer will not be added in the message
    Test #2: Send a message to an external user (outside the organization)
    Expected result: the external recipient will receive a message with a disclaimer at the footer of the message.
    Adding an internal disclaimer

    Some companies require that all the internal messages must have a security code. We can also do this with Transport Rules.
    To add an internal disclaimer, follow these steps:

    1. Open the Exchange Management Console
    2. Expand Organization Configuration
    3. Click on Hub Transport
    4. In Toolbox Action click on New Transport Rule
    5. Introduction. Type a rule name, a comment and click on Next.
    6. Conditions. We will add a disclaimer for internal users. To do so, we will select the following checkboxes:

      Check From users inside or outside the organization and select Inside

      Check To users inside or outside the organization and select Inside
    7. Actions. Now we have to define the internal disclaimer. We will put the disclaimer within the header of the message and change the color of the text to red. (Figure 13)


    Figure 13: Defining actions for our internal disclaimer transport rule

    1. Exceptions. Click Next to continue.
    2. Create Rule. Click on New.
    3. Completion. Click on Finish.

    Now we can send a message between two users inside the Exchange Organization, and check if the message sent has our new internal disclaimer (Figure 14).

    Figure 14: Internal message with internal disclaimer
    Creating a disclaimer for the support team

    In this scenario, we have to add a special disclaimer for everyone who belongs to a group called Grp-Support. To add the disclaimer, follow these steps:

    1. Open the Exchange Management Console
    2. Expand Organization Configuration
    3. Click on Hub Transport
    4. In Toolbox Action click on New Transport Rule
    5. Introduction. Type a rule name, a comment and click on Next.
    6. Conditions. In this section we have to select our support group that sends messages to internal users. Then, we have to do it as follows:

      Click on From a member of ,after that click on the Distribution Group link and choose the grp-support group, which contains all the support team members.

      Click on To users inside or outside the organization and select Inside
    7. Actions. Now we can define our Disclaimer, we can fill this out with support phone number information. (Figure 15)


    Figure 15: Disclaimer for the Support Group
    We can now test our new transport rule by sending a message from a user who belongs to grp-support, to another internal user. We can see the final result in Figure 16.

    Figure 16: Verifying the Support Disclaimer Transport Rule
    Verifying the order for Transport Rules

    We can use many disclaimers through transport rules, and we can use more than one in a single message.

    Figure 17: All of the transport rules at Hub Transport level
    In Figure 17 we can see all the transport rules for our Exchange Organization. The order that those rules are applied will be based on Priority. If the “Condition” of more than one rule applies to a message, those rules will be applied to the message.
    Q&A About Disclaimer

    Here are some answers to common questions about disclaimer transport rules and how they can help you in day-to-day tasks:
    If we want to send a message to external and internal recipients, how does that work?
    Very Simply! For the internal client, the Internal disclaimer will apply, and for the external recipient the external disclaimer will apply to his/her message (External Disclaimer Transport Rule)
    How can I manage transport rules with the Exchange Management Shell?
    It is easy. Here are all the cmdlets that we can use to manage the transport rules from the Exchange Management Shell.

    • Get-TransportRule: Get all the transport rules
    • New-TransportRule: We can use this cmdlet to create a new transport rule
    • Set-TransportRule: We will use this cmdlet when we want change something in an existing transport rule
    • Remove-TransportRule: Removes an existing transport rule

    I work for an outsourcing group that cannot use the company disclaimer. How can I manage this issue?
    You can add all the outsourced employees to a group. Then add this group to the exception of the rule.
    I have different locations and languages. Can I use different disclaimers?
    Sure. You can create a disclaimer for each language that you have, and then put all users of that language together. Then, create a transport rule for this issue.
    Conclusion

    In this article we reviewed how the transport rules can help an administrator manage disclaimers in Exchange Server 2007. We can use transport rule resources to create disclaimer rules in the organization and adjust them to meet the organization’s requirements.


  2. Facebook Comments - تعليقـك على الفيس بوك يسعدنا ويطور مجهوداتنـا


  3. Forum Ads:

  4. Forum Ads:

    اضفط هنا لمعرفة تفاصيل الإعلانات بالموقع


  5. Forum Ads:

    -->

  6. #2
    Join Date
    Jan 2008
    Location
    Egypt
    Posts
    3,946
    Blog Entries
    1
    Rep Power
    16

Similar Threads

  1. Replies: 0
    Last Post: 03-10-2010, 04:25 PM
  2. Replies: 2
    Last Post: 21-05-2010, 03:54 PM
  3. Replies: 0
    Last Post: 02-05-2010, 05:06 PM
  4. Replies: 4
    Last Post: 12-06-2008, 11:08 AM
  5. 70-236 Exchange Server 2007 Cbt and TS
    By Mohamed Fouad in forum Microsoft Certifications
    Replies: 1
    Last Post: 10-02-2008, 05:49 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

أقسام المنتدى

الروابط النصية

تابع جروبنا على الفيس بوك

صفحة Egypt Engineers على الفيس بوك

تابعنا على linkedin

جروبنا على الياهو جروب