Last July, Microsoft announced the drivers for Linux source code is available in the Hyper-V virtualization environment. In practice, the 2.6.32 of the Linux kernel version now contains drivers for synthetic Hyper-V, virtual machine including the VMBus, storage, and network components. In detail, it’s hv_vmbus, hv_storvsc, hv_blkvsc and hv_netvsc modules: these modules are described in this article.
Out configurations “officially supported”, I tested the activation of these modules in new Ubuntu Server 10.4, provided recently with the 2.6.32 kernel. To do this I found this article which explains how to enable these modules, and which I inspire me thus far.
Enabling modules
Firstly it must ensure that the Hyper-V modules are loaded at startup. To do this, edit the file / etc / initramfs-tools / modules and add the following four lines:
Then, update the initramfs image:
$ sudo update-initramfs – u
Finally, configure the network by changing the/etc/network/interfaces file to configure the network interface named seth0. Indeed, a synthetic NIC would be named seth n instead of eth n for “legacy” network adapter.
For example for a DHCP configuration, add the following to / etc / network / interfaces:
Auto seth0
iface inet dhcp seth0
or, for a static IP address:
Auto seth0
iface inet static seth0
address ip_address
netmask mask
Gateway adresse_passerelle
It remains only to restart, and check the proper loading of drivers using the command:
$ Lsmod | grep hv_
Test procedure
For my test I used Windows Server 2008 R2 Hyper-V, and 32-bit Ubuntu Server 10.4 (ubuntu-10. 04 – server – i386 .iso).
Because I set up the VM with a synthetic network adapter, it is not detected the installation. This is not serious; it will be when it has made steps outlined previously after installation.

On this error message, choose <Continue>.
Once the virtual machine installed and started, the steps outlined above are fairly simple to implement:

After a reboot (sudo reboot), we have many assets on the network map seth0 synthetic, and other drivers loaded:

That is what servers run Linux under Hyper-V with decent performance. Have to wait for integration into the Linux kernel the next features (multi-processors, clock synchronization and stop integrated), these features are currently available in the beta integration services 2.1, SUSE Linux Enterprise Server Red Hat Enterprise Linux.